• Stepless Inverter motor with low start up voltage. • Intuitive control of your pool or Jacuzzi heat pump with a touch screen controller. • Temperature setting control, able to monitor temperature and power consumption. • Active defrosting system. • Heating, cooling and auto modes. • Optional Wi-Fi connectivity, can be controlled via your smartphone from anywhere. • Silent running, corrosion resistant ABS case • R410A refrigerant
View all specs
Model
kw
ALLPH160R410 – INV
Heating Capacity
kw
2.8kW – 15.9kW
Heating Power Input
A
0.24 – 3.13
Running Current (Heating)
V/Hz
1.0 – 13.6
Power Supply
No
230V / 50Hz
Compressor Quantity
1
Compressor
Full Inverter
Heat Exchanger
Patented Dual Coil Titanium
Fan Direction
Horizontal
Noise
dB(A)
44 – 56
Water Connection
mm
50
Water Flow Volume
m3/h
5.2
Refrigerant
R410A
Net Dimensions (L/W/H)
1165 / 470 / 870
Weight
kg
68
Maximum Set Temperature
˚C
40
Size Calculator
Fourways Pool Heat Pump Calculator
Our pool heat pumps come in different strengths and sizes to suit any pool size.
Use the below calculator to determine which pool heat pump will be suitable for your pool size.
The cost of the back-to-back aircon installation (i.e. indoor unit located on the other side of the wall opposite the outdoor unit) with available plug point for the 9000btu and 12000btu is R2500.00 (incl. VAT). The cost of the installation for the 18000btu and 24000btu is R2700.00 (incl. VAT)
The cost of this installation includes the following:
Up to 3metres of refrigerant piping, drain pipe and cable
Outdoor mounting bracket (if required)
Installation to a maximum height of 3metres above ground level
Drilling of one hole for piping
Holes will be filled but not painted
The installer will quote for all costs in addition to the 3metre back-to-back installation which will include but are not limited to the following:
Any required piping and cabling in addition to the piping and cabling referred to above, or electrical connection to the main switchboard
Travelling expenses in the event of the installation being out of a 30km radius from where the unit was bought
Any other extras, including but not limited to:
external isolators and additional electrical work required
any additional refrigerant piping, insulation, drain pipe and cable
trunking to cover piping
Please note costs of isolators are not included in the installation fee. Isolator switches are a regulation requirement and are not included in the cost of the installation. A qualified electrician must install an isolator at your own cost. He must install the isolator not more than 2metres from the condenser and within view of the condenser. The cost of this is in addition to the installation cost of the unit and must be paid directly to the electrician. Indoor and outdoor units must always be earthed. You can expect to pay anything between R1000-R1500 in addition to your basic installation fee for this.
Reviews
There are no reviews yet.