In these uncertain times, your safety and health come first. Introducing the Midea Bottom Loading Touchless Water Dispenser. This unit allows you to stay hydrated and stay safe using touchless sensor technology. Simply hover your hand 2 inches above your desired setting and wait for the water to start flowing. To stop, simply remove your hand. The perfect Water Treatment solutions for the home and workplace.
View all specs
SPECIFICATIONS:
Sensor control – hover the palm of your hand 2 inches over the senor to activate desired water flow
Touch control also available
3 Temperature selections: hot, cold, ambient
Safety device to prevent over heating
Child safety lock for hot water faucet
Bottom Loading
Stainless steel hot water tank: 1L
Heating Capacity: 85°C – 4.0L/h
Cooling Capacity: 10°C – 2.0L/h
Built-in UV-LED bacteriostatic to ensure safe, clean water.
535 Watts
Dimensions (WxDxH): 310 x 360 x 1040mm
WARRANTY:
Standard warranty: 1 Year
Premium warranty: 2 Years (1 + 1)
Out of stock
Want to be notified when this product is back in stock?
The cost of the back-to-back aircon installation (i.e. indoor unit located on the other side of the wall opposite the outdoor unit) with available plug point for the 9000btu and 12000btu is R2500.00 (incl. VAT). The cost of the installation for the 18000btu and 24000btu is R2700.00 (incl. VAT)
The cost of this installation includes the following:
Up to 3metres of refrigerant piping, drain pipe and cable
Outdoor mounting bracket (if required)
Installation to a maximum height of 3metres above ground level
Drilling of one hole for piping
Holes will be filled but not painted
The installer will quote for all costs in addition to the 3metre back-to-back installation which will include but are not limited to the following:
Any required piping and cabling in addition to the piping and cabling referred to above, or electrical connection to the main switchboard
Travelling expenses in the event of the installation being out of a 30km radius from where the unit was bought
Any other extras, including but not limited to:
external isolators and additional electrical work required
any additional refrigerant piping, insulation, drain pipe and cable
trunking to cover piping
Please note costs of isolators are not included in the installation fee. Isolator switches are a regulation requirement and are not included in the cost of the installation. A qualified electrician must install an isolator at your own cost. He must install the isolator not more than 2metres from the condenser and within view of the condenser. The cost of this is in addition to the installation cost of the unit and must be paid directly to the electrician. Indoor and outdoor units must always be earthed. You can expect to pay anything between R1000-R1500 in addition to your basic installation fee for this.
Reviews
There are no reviews yet.